- 33 pressure sensors in 9 arrays Three 2 × 2 arrays in the palm, a 2 × 2 array on each finger pad and a 3 × 1 array at each fingertip sense from 10 g to 2,500 g.
- Touch in the joint stream Pressure and sensor temperature arrive at 1,000 Hz over USB 2.0 together with joint position, velocity, torque and IMU data.
- Hybrid force and position control Six direct-drive micro brushless force-control joints and one geared joint set grip force at the fingers themselves.
- Three fingers, 7 degrees of freedom The thumb has three degrees of freedom and swings from −60° to 60° at its base; the index and middle fingers have two each.
- Made for the G1 Unitree builds the Dex3-1 for its G1 humanoid, and this is the tactile version, part G1-DEX3-3FINGERHAND-TACTILE.
- 710 g, 500 g grasp The hand measures 175 × 88 × 77 mm flat, grasps up to 500 g, and its sensors take 20 kg without damage.
Description
The Unitree Dex3-1 Tactile is Unitree's three-finger dexterous robotic hand for the G1 humanoid in its tactile version, part G1-DEX3-3FINGERHAND-TACTILE. On the same seven-degree-of-freedom, force-controlled mechanism as the standard Dex3-1, it carries 33 pressure sensors in 9 arrays across the palm, the finger pads and the fingertips.
With pressure at the contact points, a G1 can tell when a finger touches, how hard each pad presses and how the load shifts during a grasp, rather than guessing contact from joint torque. The sensors cover 10 g to 2,500 g and report pressure and their own temperature in the same 1,000 Hz USB 2.0 stream as joint position, velocity, torque, voltage, current and IMU data. That suits teleoperation with touch feedback, tactile datasets for imitation learning and work with light or fragile objects.
The thumb has three degrees of freedom and the index and middle fingers two each. Six joints are direct-drive micro brushless force-control units and one is gear-driven, giving hybrid force and position control at the joints. The hand weighs 710 g, measures 175 × 88 × 77 mm flat, repeats fingertip position to ±2 mm and grasps up to 500 g on a 5 cm round hard object, with 400 W of peak power for 3 s; the sensors take 20 kg without damage. It runs on 12–58 V and from −20 to 60 °C.
The standard Dex3-1 for the G1 is the same hand without the tactile arrays, and the Dex3-1 Tactile for the Unitree H2 is sold as its own part, so order the one that matches your robot. For five fingers on a G1, see the G1 Third-Party Dexterous Hand or the tendon-driven Unitree Dex2/5, and compare our other dexterous robotic hands.
Key Capabilities
- 33 pressure sensors in 9 arrays: Three 2 × 2 arrays in the palm, a 2 × 2 array on each finger pad and a 3 × 1 array at each fingertip sense from 10 g to 2,500 g.
- Touch in the joint stream: Pressure and sensor temperature arrive at 1,000 Hz over USB 2.0 together with joint position, velocity, torque and IMU data.
- Hybrid force and position control: Six direct-drive micro brushless force-control joints and one geared joint set grip force at the fingers themselves.
- Three fingers, 7 degrees of freedom: The thumb has three degrees of freedom and swings from −60° to 60° at its base; the index and middle fingers have two each.
- Made for the G1: Unitree builds the Dex3-1 for its G1 humanoid, and this is the tactile version, part G1-DEX3-3FINGERHAND-TACTILE.
- 710 g, 500 g grasp: The hand measures 175 × 88 × 77 mm flat, grasps up to 500 g, and its sensors take 20 kg without damage.
Buying through Robotix Market
This unit is sourced new through established distribution channels and ships worldwide with the manufacturer warranty. Technical support is coordinated with the manufacturer's own service network. Deployment scope, configuration, and commissioning responsibilities are agreed as part of the quotation — on-site installation is not included in the product price.
Features
Specs
| Brand | Unitree Robotics |
|---|---|
| Model | Dex3-1, tactile version |
| Part number | G1-DEX3-3FINGERHAND-TACTILE |
| Compatible robot | Unitree G1 |
| Fingers | 3: thumb, index, middle |
| Degrees of freedom | 7: thumb 3, index finger 2, middle finger 2 |
| Joint drive | 6 micro brushless force-control joints driven directly, 1 driven through gears |
| Joint motors | F-1515 series, 45 g, 1:108 and 1:214 reduction, 0.76 N·m and 1.498 N·m maximum torque |
| Thumb joint ranges | Joint 0: −60° to 60°; joint 1: −35° to 60°; joint 2: 0–100° |
| Index and middle finger ranges | Joint 0: 0–90°; joint 1: 0–100° |
| Control | Hybrid force and position control |
| Weight | 710 g |
| Size (flat) | 175 × 88 × 77 mm |
| Fingertip repeat positioning accuracy | ±2 mm |
| Grasp load | Up to 500 g (5 cm round hard object, palm down or palm left, room temperature) |
| Peak power | 400 W for 3 s |
| Pressure sensors | 33 in 9 arrays |
| Sensor layout | Palm 2 × 2 (× 3); finger pads 2 × 2 (× 3); fingertips 3 × 1 (× 3) |
| Sensing range | 10 g – 2,500 g |
| Maximum load on the sensors without damage | 20 kg |
| Feedback | Joint mode, position, velocity, torque and temperature; voltage and current; sensor pressure and temperature; IMU data |
| Control commands | Joint mode, position, velocity, torque, stiffness, damping |
| Communication interface | USB 2.0 |
| Communication rate | 1,000 Hz |
| Packet size | 1,234 bytes sent, 1,270 bytes received |
| Working voltage | 12–58 V |
| Current | 0.2 A static at 58 V, 10 A maximum |
| Working temperature | −20 to 60 °C |
| Hand side and quantity | Confirm at quote |
Industries
Frequently Asked Questions
The Unitree Dex3-1 Tactile Three-Finger Hand for G1 is priced at CHF 6,800 in your market.
Both have the same three fingers, 7 degrees of freedom and hybrid force and position control. This version adds 33 pressure sensors in 9 arrays and reports their pressure and temperature with the joint data; the standard G1 Dex3-1 has no tactile arrays.
Contact pressure from 10 g to 2,500 g at 33 points: three 2 × 2 arrays in the palm, a 2 × 2 array on each finger pad and a 3 × 1 array at each fingertip. They also report their own temperature and take 20 kg without damage.
Seven: three in the thumb and two each in the index and middle finger. Six joints are direct-drive micro brushless force-control units and one is gear-driven.
Over USB 2.0 at 1,000 Hz on a 12–58 V supply. Commands set joint mode, position, velocity, torque, stiffness and damping, and Unitree offers the Dex3-1 as the G1 EDU's three-finger hand.
Yes. Tell us which side you need, or both for a two-handed G1; the side and quantity are confirmed with the quotation.
Unitree Dex3-1 Tactile Three-Finger Hand for G1
- Regular price
- CHF 6,800.00
- Sale price
Recently Viewed
You haven't viewed any products yet.
