- Force control at the joint Six joints are direct-drive micro brushless force-control units and one is gear-driven, so grip force is set at the finger joints.
- Three fingers, 7 degrees of freedom The thumb carries three degrees of freedom and the index and middle fingers two each, with 0–100° of bend at the outer joints.
- Made for the Unitree G1 Unitree offers the Dex3-1 as the G1 EDU's three-finger hand; this is the version without tactile arrays, part G1-DEX3-3FINGERHAND.
- 1,000 Hz over USB 2.0 Joint position, velocity, torque, temperature, voltage and current come back 1,000 times a second, and commands set stiffness and damping per joint.
- Compact at 710 g The hand measures 175 × 88 × 77 mm flat and repeats fingertip position to ±2 mm.
- Rated grasp of 500 g It holds up to 500 g on a 5 cm round hard object, palm down or palm left, with 400 W of peak power for 3 s.
Description
The Unitree Dex3-1 is Unitree's force-controlled three-finger dexterous robotic hand for the G1 humanoid, and this is the G1 accessory without tactile arrays, part G1-DEX3-3FINGERHAND. Unitree offers it as the three-finger hand of the G1 EDU, and its three opposed digits cover pinches, wraps and tool grasps with fewer joints to control than a five-finger hand.
Seven degrees of freedom are split three in the thumb and two each in the index and middle finger. Six joints are direct-drive micro brushless force-control units built on Unitree's 45 g F-1515 joint motors, and one is gear-driven, so hybrid force and position control happens at the joints themselves. Every joint takes position, velocity, torque, stiffness and damping commands and reports its state at 1,000 Hz over USB 2.0.
The hand weighs 710 g, measures 175 × 88 × 77 mm flat and repeats fingertip position to ±2 mm. It holds up to 500 g on a 5 cm round hard object, palm down or palm left, with 400 W of peak power for 3 s, runs on 12–58 V and works from −20 to 60 °C. Without tactile arrays it suits teleoperation, grasp research and teaching, where joint force and position feedback are enough.
For touch data, the Dex3-1 Tactile for the G1 adds 33 pressure sensors on the same mechanism. The Dex3-1 for the Unitree H2 is a separate part for that robot. Five-finger options for the G1 are the G1 Third-Party Dexterous Hand and the Unitree Dex2/5; see all of our dexterous robotic hands.
Key Capabilities
- Force control at the joint: Six joints are direct-drive micro brushless force-control units and one is gear-driven, so grip force is set at the finger joints.
- Three fingers, 7 degrees of freedom: The thumb carries three degrees of freedom and the index and middle fingers two each, with 0–100° of bend at the outer joints.
- Made for the Unitree G1: Unitree offers the Dex3-1 as the G1 EDU's three-finger hand; this is the version without tactile arrays, part G1-DEX3-3FINGERHAND.
- 1,000 Hz over USB 2.0: Joint position, velocity, torque, temperature, voltage and current come back 1,000 times a second, and commands set stiffness and damping per joint.
- Compact at 710 g: The hand measures 175 × 88 × 77 mm flat and repeats fingertip position to ±2 mm.
- Rated grasp of 500 g: It holds up to 500 g on a 5 cm round hard object, palm down or palm left, with 400 W of peak power for 3 s.
Buying through Robotix Market
This unit is sourced new through established distribution channels and ships worldwide with the manufacturer warranty. Technical support is coordinated with the manufacturer's own service network. Deployment scope, configuration, and commissioning responsibilities are agreed as part of the quotation — on-site installation is not included in the product price.
Features
Specs
| Brand | Unitree Robotics |
|---|---|
| Model | Dex3-1, without tactile arrays |
| Part number | G1-DEX3-3FINGERHAND |
| Compatible robot | Unitree G1 |
| Fingers | 3: thumb, index, middle |
| Degrees of freedom | 7: thumb 3, index finger 2, middle finger 2 |
| Joint drive | 6 micro brushless force-control joints driven directly, 1 driven through gears |
| Joint motors | F-1515 series, 45 g, 1:108 and 1:214 reduction, 0.76 N·m and 1.498 N·m maximum torque |
| Thumb joint ranges | Joint 0: −60° to 60°; joint 1: −35° to 60°; joint 2: 0–100° |
| Index and middle finger ranges | Joint 0: 0–90°; joint 1: 0–100° |
| Control | Hybrid force and position control |
| Weight | 710 g |
| Size (flat) | 175 × 88 × 77 mm |
| Fingertip repeat positioning accuracy | ±2 mm |
| Grasp load | Up to 500 g (5 cm round hard object, palm down or palm left, room temperature) |
| Peak power | 400 W for 3 s |
| Tactile sensors | None (fitted on the Dex3-1 Tactile) |
| Feedback | Joint mode, position, velocity, torque and temperature; voltage and current |
| Control commands | Joint mode, position, velocity, torque, stiffness, damping |
| Communication interface | USB 2.0 |
| Communication rate | 1,000 Hz |
| Packet size | 1,234 bytes sent, 1,270 bytes received |
| Working voltage | 12–58 V |
| Current | 0.2 A static at 58 V, 10 A maximum |
| Working temperature | −20 to 60 °C |
| Hand side and quantity | Confirm at quote |
Industries
Frequently Asked Questions
The Unitree Dex3-1 Three-Finger Dexterous Hand for G1 is priced at CHF 5,650 in your market.
No. This is the G1 Dex3-1 without tactile arrays, controlled through joint force and position. The Dex3-1 Tactile for the G1 adds 33 pressure sensors in 9 arrays that sense from 10 g to 2,500 g.
Seven: three in the thumb and two each in the index and middle finger. The thumb base swings from −60° to 60°, and the outer finger joints bend from 0 to 100°.
It weighs 710 g and grasps up to 500 g on a 5 cm round hard object, palm down or palm left, with 400 W of peak power for 3 s.
Over USB 2.0 at 1,000 Hz on a 12–58 V supply. Each joint takes mode, position, velocity, torque, stiffness and damping commands and reports position, velocity, torque, temperature, voltage and current.
Both are Unitree's Dex3-1. This one is the G1 accessory, part G1-DEX3-3FINGERHAND; the H2 version is sold as its own part, so order the one that matches your robot. The side and quantity are confirmed with the quotation.
Unitree Dex3-1 Three-Finger Dexterous Hand for G1
- Regular price
- CHF 5,650.00
- Sale price
Recently Viewed
You haven't viewed any products yet.
