- 16 degrees of freedom, 10 driven The thumb has three driven joints, the index, ring and little fingers two each and the middle finger one, with six more joints following passively.
- About 510 g at 180 mm A 180 × 85 × 38.5 mm body in PA and silicone keeps the load on a humanoid's wrist low.
- Soft-touch, pinch-safe build A soft-touch coating and pinch-prevention design suit robots that gesture, hand over objects and work near people.
- Three ways to connect CAN FD and RS-485 for the robot plus USB Type-C to a host computer, with 1 kHz communication and over-the-air firmware updates.
- Four control modes Position, torque, hybrid position-torque and velocity control, with joint position, torque, speed, temperature, voltage and current fed back.
- SDK, ROS 2 and URDF AgiBot's C++ and Python SDK includes a kinematics library and a ROS 2 interface, and left- and right-hand URDF and MuJoCo models cover simulation.
Description
The AgiBot OmniHand 2025 is a compact five-finger dexterous robotic hand for interactive humanoid robots, and this is the right hand in the standard build, without tactile sensors. It has 16 degrees of freedom, 10 of them driven, in a body 180 mm long that weighs about 510 g, sized for humanoids of many makes as well as robot arms.
AgiBot designed it for gesture interaction and light-duty tasks: the common interactive gestures, simple grasps and handling everyday objects. Its soft-touch coating and pinch-prevention design suit robots that work in receptions, showrooms, classrooms and labs. Each fingertip pushes with up to 5 N, the five-finger grip reaches at least 5 kg in hybrid force control mode, and fingertips repeat to 0.3 mm, opening or closing in 0.5 s.
The standard build controls its grip from the joints: position, torque, hybrid position-torque and velocity modes, with joint position, torque, speed and temperature fed back over CAN FD or RS-485 at 1 kHz, or over USB Type-C to a host computer. It runs on 24 V, mounts with four M4 screws at the wrist and updates its firmware over the air. AgiBot's SDK provides C++ and Python APIs, a kinematics library and a ROS 2 interface, and its left- and right-hand URDF and MuJoCo models cover simulation.
For a two-handed robot, pair it with the OmniHand 2025 left hand. If the robot should feel contact, the OmniHand 2025 Tactile right hand adds force-sensing arrays across the fingers, palm and back of the hand, which enable AgiBot's back-of-hand touch interaction. Compare both with our other dexterous robotic hands.
Key Capabilities
- 16 degrees of freedom, 10 driven: The thumb has three driven joints, the index, ring and little fingers two each and the middle finger one, with six more joints following passively.
- About 510 g at 180 mm: A 180 × 85 × 38.5 mm body in PA and silicone keeps the load on a humanoid's wrist low.
- Soft-touch, pinch-safe build: A soft-touch coating and pinch-prevention design suit robots that gesture, hand over objects and work near people.
- Three ways to connect: CAN FD and RS-485 for the robot plus USB Type-C to a host computer, with 1 kHz communication and over-the-air firmware updates.
- Four control modes: Position, torque, hybrid position-torque and velocity control, with joint position, torque, speed, temperature, voltage and current fed back.
- SDK, ROS 2 and URDF: AgiBot's C++ and Python SDK includes a kinematics library and a ROS 2 interface, and left- and right-hand URDF and MuJoCo models cover simulation.
This model is offered on a quotation basis. Configuration, accessories, integration scope and delivery schedule all change the final figure, so pricing is confirmed per project rather than listed.
Buying through Robotix Market
This unit is sourced new through established distribution channels and ships worldwide with the manufacturer warranty. Technical support is coordinated with the manufacturer's own service network. Deployment scope, configuration, and commissioning responsibilities are agreed as part of the quotation — on-site installation is not included in the product price.
Official Product Videos
Features
Specs
| Brand | AgiBot |
|---|---|
| Model | OmniHand 2025 (O10), standard build |
| Hand side | Right |
| Fingers | 5 |
| Degrees of freedom | 16 (10 active, 6 passive) |
| Active joints | Thumb 3, index finger 2, middle finger 1, ring finger 2, little finger 2 |
| Transmission | Linkage, motor and gear drive |
| Material | PA and silicone with a soft-touch coating; pinch-prevention design |
| Weight | About 510 g |
| Size | 180 × 85 × 38.5 mm |
| Opening / closing time | 0.5 s / 0.5 s minimum |
| Fingertip repeat positioning accuracy | 0.3 mm |
| Maximum fingertip force | 5 N (typical) |
| Five-finger grip force | ≥ 5 kg (hybrid force control mode) |
| Load, palm up | 1 kg typical, 2 kg maximum (5 cm rigid object) |
| Minimum grasp diameter | 5 mm |
| Tactile sensors | None (fitted on the OmniHand 2025 Tactile) |
| Communication interfaces | CAN FD (1 Mbit/s arbitration, 5 Mbit/s data), RS-485, USB Type-C to a host computer |
| Communication rate | 1 kHz |
| Feedback | Joint position, angle, torque, speed and temperature; voltage and current |
| Control modes | Position, torque, hybrid position-torque and velocity |
| Operating voltage | 24 V nominal (18–27 V) |
| Current | 0.2 A idle, 3.5 A maximum |
| Operating temperature | 0–45 °C |
| Firmware updates | Over the air (OTA) |
| SDK | C++ and Python APIs with a kinematics library; ROS 2 interface on Linux; Windows host software |
| Simulation models | Left- and right-hand URDF and MuJoCo models (ROS 2 Humble) |
| Wrist mounting | Four M4 screws at the wrist |
| Power connector | XT30 |
| What's in the box | OmniHand 2025, power and CAN FD cable (XT30), RS-485 cable, USB Type-C cable, quick start guide, product certificate |
| Robot mounting | Confirm at quote |
Industries
Frequently Asked Questions
It is offered by quotation — configuration, quantity and delivery are confirmed per project.
No. This is the standard build, which controls its grip through joint position and torque feedback. The OmniHand 2025 Tactile adds force-sensing arrays on the fingers, palm and back of the hand with 0.1 N resolution.
Sixteen, 10 of them driven: three in the thumb, two each in the index, ring and little fingers and one in the middle finger. The other six joints move passively with them.
About 510 g. Each fingertip pushes with up to 5 N, and the five-finger grip reaches at least 5 kg in hybrid force control mode.
Over CAN FD or RS-485, or USB Type-C to a host computer, on a 24 V supply, and it mounts with four M4 screws at the wrist. Fitment to your arm or humanoid is confirmed with the quotation.
This is the right hand. The OmniHand 2025 left hand has the same specification with mirrored joints, so one of each makes a pair, and AgiBot's SDK addresses each hand by its side.
Recently Viewed
You haven't viewed any products yet.
