- Built for the left wrist Mirrored joints make this the left hand of a pair, with the same specification as the OmniHand 2025 right hand.
- Ten driven joints, six passive The passive joints follow the driven ones so the five fingers curl around an object, giving 16 degrees of freedom in all.
- 0.3 mm fingertip repeatability Fingertips return to within 0.3 mm, and the hand opens or closes in 0.5 s.
- 5 kg five-finger grip In hybrid force control mode the five-finger grip reaches at least 5 kg, with up to 5 N at each fingertip.
- Simulation-ready AgiBot provides left- and right-hand URDF and MuJoCo models, and its SDK adds C++ and Python APIs, kinematics and ROS 2.
- CAN FD, RS-485 or USB The hand runs on 24 V, communicates at 1 kHz and takes firmware updates over the air.
Description
This is the left hand of the AgiBot OmniHand 2025, AgiBot's compact interactive dexterous robotic hand, in the standard build without tactile sensors. Weighing about 510 g and measuring 180 × 85 × 38.5 mm, it brings 16 degrees of freedom to the left wrist of a humanoid robot or robot arm, and with the right hand it completes a two-handed setup.
Ten of its 16 joints are driven: three in the thumb, two each in the index, ring and little fingers and one in the middle finger, while six more follow passively so the fingers curl naturally around an object. A linkage transmission with motor and gear drive opens or closes the hand in 0.5 s, fingertips repeat to 0.3 mm and push with up to 5 N, and the five-finger grip reaches at least 5 kg in hybrid force control. The body is PA and silicone with a soft-touch coating and a pinch-prevention design, for robots that gesture and pass things to people.
For development teams, the hand talks CAN FD or RS-485 at 1 kHz and connects to a host computer over USB Type-C. AgiBot's SDK provides C++ and Python APIs with a kinematics library and a ROS 2 interface, and left- and right-hand URDF and MuJoCo models let you test grasps in simulation first. Control runs in position, torque, hybrid position-torque or velocity mode on 24 V, and the firmware updates over the air.
Pair it with the OmniHand 2025 right hand for bimanual work. For contact sensing, choose the OmniHand 2025 Tactile left hand, which adds force-sensing arrays over the fingers, palm and back of the hand; for higher force and 19 degrees of freedom, see the OmniHand Pro 2025. All of them sit among our dexterous robotic hands.
Key Capabilities
- Built for the left wrist: Mirrored joints make this the left hand of a pair, with the same specification as the OmniHand 2025 right hand.
- Ten driven joints, six passive: The passive joints follow the driven ones so the five fingers curl around an object, giving 16 degrees of freedom in all.
- 0.3 mm fingertip repeatability: Fingertips return to within 0.3 mm, and the hand opens or closes in 0.5 s.
- 5 kg five-finger grip: In hybrid force control mode the five-finger grip reaches at least 5 kg, with up to 5 N at each fingertip.
- Simulation-ready: AgiBot provides left- and right-hand URDF and MuJoCo models, and its SDK adds C++ and Python APIs, kinematics and ROS 2.
- CAN FD, RS-485 or USB: The hand runs on 24 V, communicates at 1 kHz and takes firmware updates over the air.
This model is offered on a quotation basis. Configuration, accessories, integration scope and delivery schedule all change the final figure, so pricing is confirmed per project rather than listed.
Buying through Robotix Market
This unit is sourced new through established distribution channels and ships worldwide with the manufacturer warranty. Technical support is coordinated with the manufacturer's own service network. Deployment scope, configuration, and commissioning responsibilities are agreed as part of the quotation — on-site installation is not included in the product price.
Official Product Videos
Features
Specs
| Brand | AgiBot |
|---|---|
| Model | OmniHand 2025 (O10), standard build |
| Hand side | Left |
| Fingers | 5 |
| Degrees of freedom | 16 (10 active, 6 passive) |
| Active joints | Thumb 3, index finger 2, middle finger 1, ring finger 2, little finger 2 |
| Transmission | Linkage, motor and gear drive |
| Material | PA and silicone with a soft-touch coating; pinch-prevention design |
| Weight | About 510 g |
| Size | 180 × 85 × 38.5 mm |
| Opening / closing time | 0.5 s / 0.5 s minimum |
| Fingertip repeat positioning accuracy | 0.3 mm |
| Maximum fingertip force | 5 N (typical) |
| Five-finger grip force | ≥ 5 kg (hybrid force control mode) |
| Load, palm up | 1 kg typical, 2 kg maximum (5 cm rigid object) |
| Minimum grasp diameter | 5 mm |
| Tactile sensors | None (fitted on the OmniHand 2025 Tactile) |
| Communication interfaces | CAN FD (1 Mbit/s arbitration, 5 Mbit/s data), RS-485, USB Type-C to a host computer |
| Communication rate | 1 kHz |
| Feedback | Joint position, angle, torque, speed and temperature; voltage and current |
| Control modes | Position, torque, hybrid position-torque and velocity |
| Operating voltage | 24 V nominal (18–27 V) |
| Current | 0.2 A idle, 3.5 A maximum |
| Operating temperature | 0–45 °C |
| Firmware updates | Over the air (OTA) |
| SDK | C++ and Python APIs with a kinematics library; ROS 2 interface on Linux; Windows host software |
| Simulation models | Left- and right-hand URDF and MuJoCo models (ROS 2 Humble) |
| Wrist mounting | Four M4 screws at the wrist |
| Power connector | XT30 |
| What's in the box | OmniHand 2025, power and CAN FD cable (XT30), RS-485 cable, USB Type-C cable, quick start guide, product certificate |
| Robot mounting | Confirm at quote |
Industries
Frequently Asked Questions
It is offered by quotation — configuration, quantity and delivery are confirmed per project.
This is the left hand. Its right-hand twin has the same specification with mirrored joint ranges, and ordering one of each gives a two-handed robot a matched pair.
No, this build has no tactile sensors and grips through joint position and torque control. The OmniHand 2025 Tactile adds one-axis force sensing on the fingers, palm and back of the hand, from 0 to 20 N at 0.1 N resolution.
Sixteen in total: 10 driven by motors and 6 passive. The thumb has four joints, three of them driven.
AgiBot's SDK provides C++ and Python APIs, a kinematics library and a ROS 2 interface on Linux, with Windows host software, plus left- and right-hand URDF and MuJoCo models.
The Pro 2025 has 19 degrees of freedom (12 active), 20 N fingertips and three-axis fingertip force sensing, at up to 750 g and over CAN FD only. The OmniHand 2025 is the lighter, simpler hand at about 510 g, with RS-485 and USB as well as CAN FD.
Recently Viewed
You haven't viewed any products yet.
