- Touch on fingers, palm and back More than 300 force-sensing taxels in seven regions read one-axis force from 0 to 20 N at 0.1 N resolution.
- Back-of-hand touch interaction Arrays on the back of the hand let the robot respond when a person touches it there, alongside the usual gestures.
- Tactile control mode A tactile mode and tactile pressure feedback sit beside position, torque, hybrid position-torque and velocity control.
- 16 degrees of freedom at up to 550 g Ten driven and six passive joints sit in a 180 × 85 × 38.5 mm PA and silicone body.
- 5 kg grip, 0.3 mm repeatability The five-finger grip reaches at least 5 kg in hybrid force control, fingertips repeat to 0.3 mm and the hand closes in 0.5 s.
- CAN FD, RS-485 and USB Communication runs at 1 kHz on 24 V, with a C++, Python and ROS 2 SDK and over-the-air firmware updates.
Description
The AgiBot OmniHand 2025 Tactile is the touch-sensing build of AgiBot's compact OmniHand 2025 dexterous robotic hand, and this is the right hand. Force-sensing arrays cover all five fingers, the palm and the back of the hand, adding contact data to 16 degrees of freedom (10 driven) in a 180 mm hand that weighs no more than 550 g.
The sensing is what separates it from the standard OmniHand 2025. More than 300 force-sensing taxels sit in seven regions — the thumb, four fingers, palm and back of the hand — each reading one-axis force from 0 to 20 N at 0.1 N resolution and tolerating 200 N without damage. The arrays on the back of the hand give the back-of-hand touch interaction AgiBot highlights for this hand. A tactile control mode and tactile pressure feedback join the position, torque, hybrid and velocity modes, so research teams can record contact during grasping, teleoperation and human-robot interaction.
Mechanically it matches the standard hand: a thumb with three driven joints, two each in the index, ring and little fingers and one in the middle finger, 0.3 mm fingertip repeatability, 0.5 s to open or close, up to 5 N per fingertip and at least 5 kg of five-finger grip in hybrid force control. It connects over CAN FD or RS-485 at 1 kHz, or USB Type-C to a host computer, on 24 V, and AgiBot's SDK (C++, Python, ROS 2) reads the tactile arrays alongside the joints.
The OmniHand 2025 Tactile left hand completes a sensing pair, and the standard OmniHand 2025 right hand is the same hand without the arrays. For three-axis fingertip force at 0.01 N, see the OmniHand Pro 2025, or browse all our dexterous robotic hands.
Key Capabilities
- Touch on fingers, palm and back: More than 300 force-sensing taxels in seven regions read one-axis force from 0 to 20 N at 0.1 N resolution.
- Back-of-hand touch interaction: Arrays on the back of the hand let the robot respond when a person touches it there, alongside the usual gestures.
- Tactile control mode: A tactile mode and tactile pressure feedback sit beside position, torque, hybrid position-torque and velocity control.
- 16 degrees of freedom at up to 550 g: Ten driven and six passive joints sit in a 180 × 85 × 38.5 mm PA and silicone body.
- 5 kg grip, 0.3 mm repeatability: The five-finger grip reaches at least 5 kg in hybrid force control, fingertips repeat to 0.3 mm and the hand closes in 0.5 s.
- CAN FD, RS-485 and USB: Communication runs at 1 kHz on 24 V, with a C++, Python and ROS 2 SDK and over-the-air firmware updates.
This model is offered on a quotation basis. Configuration, accessories, integration scope and delivery schedule all change the final figure, so pricing is confirmed per project rather than listed.
Buying through Robotix Market
This unit is sourced new through established distribution channels and ships worldwide with the manufacturer warranty. Technical support is coordinated with the manufacturer's own service network. Deployment scope, configuration, and commissioning responsibilities are agreed as part of the quotation — on-site installation is not included in the product price.
Official Product Videos
Features
Specs
| Brand | AgiBot |
|---|---|
| Model | OmniHand 2025 (O10), tactile build |
| Hand side | Right |
| Fingers | 5 |
| Degrees of freedom | 16 (10 active, 6 passive) |
| Active joints | Thumb 3, index finger 2, middle finger 1, ring finger 2, little finger 2 |
| Transmission | Linkage, motor and gear drive |
| Material | PA and silicone with a soft-touch coating; pinch-prevention design |
| Weight | Up to 550 g |
| Size | 180 × 85 × 38.5 mm |
| Opening / closing time | 0.5 s / 0.5 s minimum |
| Fingertip repeat positioning accuracy | 0.3 mm |
| Maximum fingertip force | 5 N (typical) |
| Five-finger grip force | ≥ 5 kg (hybrid force control mode) |
| Load, palm up | 1 kg typical, 2 kg maximum (5 cm rigid object) |
| Minimum grasp diameter | 5 mm |
| Tactile sensing | One-axis force sensing in seven regions: thumb, index, middle, ring and little finger, palm and back of the hand |
| Force-sensing taxels | More than 300 |
| Tactile resolution | 0.1 N |
| Tactile range | 0–20 N |
| Maximum non-destructive force | 200 N |
| Communication interfaces | CAN FD (1 Mbit/s arbitration, 5 Mbit/s data), RS-485, USB Type-C to a host computer |
| Communication rate | 1 kHz |
| Feedback | Joint position, angle, torque, speed and temperature; voltage and current; tactile pressure |
| Control modes | Position, torque, hybrid position-torque and velocity, plus tactile mode |
| Operating voltage | 24 V nominal (18–27 V) |
| Current | 0.2 A idle, 3.5 A maximum |
| Operating temperature | 0–45 °C |
| Firmware updates | Over the air (OTA) |
| SDK | C++ and Python APIs with a kinematics library; ROS 2 interface on Linux; Windows host software |
| Simulation models | Left- and right-hand URDF and MuJoCo models (ROS 2 Humble) |
| Wrist mounting | Four M4 screws at the wrist |
| Power connector | XT30 |
| What's in the box | OmniHand 2025, power and CAN FD cable (XT30), RS-485 cable, USB Type-C cable, quick start guide, product certificate |
| Robot mounting | Confirm at quote |
Industries
Frequently Asked Questions
It is offered by quotation — configuration, quantity and delivery are confirmed per project.
One-axis force sensing in seven regions — the thumb, four fingers, palm and back of the hand — with more than 300 taxels. Each reads 0–20 N at 0.1 N resolution and takes 200 N without damage.
The joints, size and interfaces are the same; the Tactile adds the force-sensing arrays, a tactile control mode, tactile pressure feedback and back-of-hand touch interaction. It weighs up to 550 g against about 510 g.
Sixteen, with 10 driven by motors: three in the thumb, two each in the index, ring and little fingers and one in the middle finger.
Over CAN FD or RS-485 at 1 kHz, or USB Type-C to a host computer, on 24 V. AgiBot's SDK offers C++ and Python APIs and a ROS 2 interface; fitment to your robot is confirmed with the quotation.
Yes, this is the right hand. The OmniHand 2025 Tactile left hand mirrors it, so one of each gives a two-handed robot touch sensing on both sides.
Recently Viewed
You haven't viewed any products yet.
