- Smallest module in the line A 0.19 kg base build in a 60.5 mm housing, with a 6 mm hollow shaft for routing cable through the joint.
- Two gear ratios 51:1 gives 3.3 N·m peak torque at up to 118 RPM; 101:1 gives 4.8 N·m at up to 59 RPM.
- 36 W electrical platform All builds run from 24–48 V at 1 A rated and 2 A maximum continuous current, with a 0.024 N·m/A torque constant.
- 40 arcsec gear backlash Backlash is 40 arcsec on both ratios, the widest figure in the module line.
- Three fully specified builds The base unit is 60.5 mm at 0.19 kg, the extended -B body 78.6 mm at 0.27 kg, and the -2E-EC 60.5 mm at 0.23 kg.
- EtherCAT on the -2E-EC build Base and -B builds run a 16-bit encoder on CAN; the -2E-EC adds a 16/18-bit encoder option and EtherCAT.
- Fourth build confirmed at quote The -B-2E-EC designation combines the -B and -2E-EC suffixes, and its figures are confirmed with the quotation.
Description
The CRA-RI30-40 is the smallest integrated joint in the Ti5 lightweight module line: motor, harmonic-class gear stage, encoder and drive electronics in a 60.5 mm housing weighing 190 g, with a 6 mm hollow shaft through the middle for cabling. It is the module for distal axes — wrists, grippers, small limb joints — where every gram is carried by every joint below it.
Two gear ratios are offered and they bracket the module's whole envelope. At 51:1 it gives 3.3 N·m peak torque and turns at up to 118 RPM; at 101:1 it gives 4.8 N·m at up to 59 RPM. Gear backlash is 40 arcsec on both ratios, the widest figure in the module line, which is the trade this frame size makes for its mass. Electrically all builds are the same: 36 W rated, 24–48 V, 1 A rated and 2 A maximum continuous current, with a 0.024 N·m/A torque constant.
Three builds are fully specified. The base CRA-RI30-40-PRO-2-XXX is 60.5 mm long at 0.19 kg; the extended -B body is 78.6 mm at 0.27 kg; the -2E-EC keeps the short 60.5 mm body at 0.23 kg but adds a 16/18-bit encoder option and EtherCAT alongside CAN, which is what deterministic multi-axis synchronisation needs. A fourth designation, -B-2E-EC, completes the family, and its figures are confirmed with the quotation.
The module is a component for robot builders rather than a finished machine: it presents a mechanical interface and a bus, and the structure, controller, power distribution and software around it are the integrator's work. Selection usually starts from required torque, the axial length available and the fieldbus the controller already speaks.
Key Capabilities
- Smallest module in the line: A 0.19 kg base build in a 60.5 mm housing, with a 6 mm hollow shaft for routing cable through the joint.
- Two gear ratios: 51:1 gives 3.3 N·m peak torque at up to 118 RPM; 101:1 gives 4.8 N·m at up to 59 RPM.
- 36 W electrical platform: All builds run from 24–48 V at 1 A rated and 2 A maximum continuous current, with a 0.024 N·m/A torque constant.
- 40 arcsec gear backlash: Backlash is 40 arcsec on both ratios, the widest figure in the module line.
- Three fully specified builds: The base unit is 60.5 mm at 0.19 kg, the extended -B body 78.6 mm at 0.27 kg, and the -2E-EC 60.5 mm at 0.23 kg.
- EtherCAT on the -2E-EC build: Base and -B builds run a 16-bit encoder on CAN; the -2E-EC adds a 16/18-bit encoder option and EtherCAT.
- Fourth build confirmed at quote: The -B-2E-EC designation combines the -B and -2E-EC suffixes, and its figures are confirmed with the quotation.
This model is offered on a quotation basis. Configuration, accessories, integration scope and delivery schedule all change the final figure, so pricing is confirmed per project rather than listed.
Buying through Robotix Market
This unit is sourced new through established distribution channels and ships worldwide with the manufacturer warranty. Technical support is coordinated with the manufacturer's own service network. Deployment scope, configuration, and commissioning responsibilities are agreed as part of the quotation — on-site installation is not included in the product price.
Features
Specs
| Brand | Ti5 Robotics |
|---|---|
| Model Family | CRA-RI30-40-PRO-2 |
| Product Type | Integrated rotary joint module (motor, gearing, encoder, drive) |
| Builds | -XXX (base), -XXX-B (extended body), -XXX-2E-EC (dual encoder, EtherCAT) |
| Further Build | -XXX-B-2E-EC — confirm at quote |
| Gear Ratios | 51:1, 101:1 |
| Peak Torque | 51:1 — 3.3 N·m; 101:1 — 4.8 N·m |
| Max Allowable Torque at Average Load | 51:1 — 2.3 N·m; 101:1 — 3.3 N·m |
| Rated Torque at 2000 RPM Input | 51:1 — 1.8 N·m; 101:1 — 2.4 N·m |
| Peak Speed | 51:1 — 118 RPM; 101:1 — 59 RPM |
| Rated Speed at Half Rated Torque | 51:1 — 90 RPM; 101:1 — 45 RPM |
| Gear Backlash | 40 arcsec on both ratios |
| Rated Power | 36 W |
| Supply Voltage | 24–48 V |
| Rated Current | 1 A |
| Max Continuous Current | 2 A |
| Torque Constant | 0.024 N·m/A |
| Encoder Resolution | 16-bit (base, -B); 16/18-bit option on -2E-EC |
| Communication Bus | CAN (base, -B); CAN or EtherCAT on -2E-EC |
| Hollow Shaft | 6 mm |
| Length | 60.5 ±0.5 mm base; 78.6 ±0.5 mm -B; 60.5 ±0.5 mm -2E-EC |
| Mass | 0.19 kg base; 0.27 kg -B; 0.23 kg -2E-EC |
| Rotor Inertia | 27.4 g·cm² base; 45.1 g·cm² -B; 23.73 g·cm² -2E-EC |
| Ingress Protection | Confirm at quote |
| Operating Temperature | Confirm at quote |
| Price | Quotation only |
Industries
Frequently Asked Questions
There are two: 51:1, rated at 3.3 N·m peak torque and up to 118 RPM, and 101:1, rated at 4.8 N·m and up to 59 RPM. Backlash is 40 arcsec on both.
It is the small end of the line. The 40-52 frame raises peak torque to 11 N·m on a 12 mm hollow shaft and 90 W, where the 30-40 stops at 4.8 N·m, 6 mm and 36 W at clearly lower mass. It is a distal-axis module, not a hip or shoulder joint.
The -2E-EC build comes with CAN or EtherCAT and a 16/18-bit encoder option. The base and -B builds use CAN with a 16-bit encoder. The -B-2E-EC designation implies both options, and its figures are confirmed with the quotation.
Masses are 0.19 kg for the base build, 0.23 kg for the -2E-EC and 0.27 kg for the extended -B body.
Yes, 6 mm on all builds, which lets cable and signal lines pass through the rotation axis instead of being looped outside the joint.
It is offered by quotation. Version, gear ratio or configuration, quantity and delivery are confirmed per project, and the price is set in the quotation.
Recently Viewed
You haven't viewed any products yet.
