- 24 joints, 20 driven Twenty motor-driven degrees of freedom and four coupled fingertip movements give the hand human kinematics, down to a two-joint wrist.
- Little-finger opposition An extra joint in the palm swings the little finger toward the thumb, and the five-joint thumb opposes every finger.
- Tendon drive from 20 Smart Motors Each motor unit combines motor, gearbox, tendon force sensing and electronics, closes its torque loop at 5 kHz and can run at zero force so a joint is backdrivable.
- Tactile thumb and index fingertips Two Shadow Tactile Fingertips with 17 three-axis taxels each come fitted, and the other three fingers can take them too.
- Over 100 sensors at up to 1 kHz Hall-effect sensors read every joint to about 0.2°, 40 tendon load sensors resolve about 30 mN, and an IMU completes the set.
- EtherCAT and ROS from day one The hand ships with an Ubuntu control PC, ROS drivers, Python and C++ access and a Gazebo model that runs the same code as the real hand.
- Right, left or a pair A mirrored left hand makes a bimanual pair, and Shadow offers the hand integrated with a UR10e arm as one ROS-controlled system.
Description
The Shadow Dexterous Hand (DH) is Shadow Robot Company's five-finger dexterous robotic hand, the full-size model of its Dexterous Hand series. It is built to the shape and size of a typical adult male hand and reproduces human kinematics with 24 joints: 20 driven by their own motors through tendons, plus four coupled movements that bend the fingertips the way a human finger does. It comes as a right hand, or mirrored as a left hand for two-handed systems.
Research groups use the Shadow Hand for grasping, in-hand manipulation, teleoperation, neural control and brain-computer interface work. Each finger has three degrees of freedom over four joints, the thumb five, an extra joint in the palm lets the little finger oppose the thumb, and two wrist joints help position the hand on a robot arm. Twenty Smart Motor units in the hand base each combine a Maxon motor, gearbox, tendon force sensing and electronics, close the torque loop at 5 kHz and can run at zero force so a joint can be back-driven. Every joint except the coupled fingertip joints is controlled to ±1°.
More than 100 sensors report at up to 1,000 Hz: a Hall-effect sensor on every joint at about 0.2°, 40 tendon load sensors at about 30 mN, an IMU, and Shadow Tactile Fingertips on the thumb and index finger with 17 three-axis taxels each. The hand talks to its control PC over 100 Mbps EtherCAT and is fully integrated with ROS, including a Gazebo model that runs the same code as the real hand. It weighs 4.3 kg with its forearm, holds up to 4 kg in a power grasp and runs from the 48 V supply provided.
The Shadow Dexterous Hand is sold by quotation, and its price follows the configuration: right or left hand, tactile fingertips on every finger, a bimanual pair, or the version Shadow integrates with a Universal Robots UR10e arm. For a lighter hand, the Shadow Dexterous Hand Lite (DHL) keeps three fingers and the thumb at 2.4 kg, the Extra Lite (DHEL) two fingers and the thumb, and the Extra Super Lite (DHSL) one finger and the thumb. The three-finger Shadow DEX-EE is built for reinforcement-learning rigs; or compare our full range of dexterous robotic hands.
Key Capabilities
- 24 joints, 20 driven: Twenty motor-driven degrees of freedom and four coupled fingertip movements give the hand human kinematics, down to a two-joint wrist.
- Little-finger opposition: An extra joint in the palm swings the little finger toward the thumb, and the five-joint thumb opposes every finger.
- Tendon drive from 20 Smart Motors: Each motor unit combines motor, gearbox, tendon force sensing and electronics, closes its torque loop at 5 kHz and can run at zero force so a joint is backdrivable.
- Tactile thumb and index fingertips: Two Shadow Tactile Fingertips with 17 three-axis taxels each come fitted, and the other three fingers can take them too.
- Over 100 sensors at up to 1 kHz: Hall-effect sensors read every joint to about 0.2°, 40 tendon load sensors resolve about 30 mN, and an IMU completes the set.
- EtherCAT and ROS from day one: The hand ships with an Ubuntu control PC, ROS drivers, Python and C++ access and a Gazebo model that runs the same code as the real hand.
- Right, left or a pair: A mirrored left hand makes a bimanual pair, and Shadow offers the hand integrated with a UR10e arm as one ROS-controlled system.
This model is offered on a quotation basis. Configuration, accessories, integration scope and delivery schedule all change the final figure, so pricing is confirmed per project rather than listed.
Buying through Robotix Market
This unit is sourced new through established distribution channels and ships worldwide with the manufacturer warranty. Technical support is coordinated with the manufacturer's own service network. Deployment scope, configuration, and commissioning responsibilities are agreed as part of the quotation — on-site installation is not included in the product price.
Features
Specs
| Brand | Shadow Robot Company |
|---|---|
| Model | Shadow Dexterous Hand (DH) |
| Fingers | 5 (four fingers and a thumb) |
| Joints | 24 |
| Degrees of freedom | 20 actuated, plus 4 coupled (under-actuated) fingertip movements |
| Thumb | 5 degrees of freedom, 5 joints |
| Each finger | 3 degrees of freedom, 4 joints; middle and distal joints coupled |
| Little finger | Extra palm joint (0–45°) for opposition to the thumb |
| Wrist | 2 joints: WR1 −40° to 28°, WR2 −28° to 8° |
| Finger joint ranges | J1 and J2 0–90°, J3 −15° to 90°, J4 (side to side) −20° to 20° |
| Thumb joint ranges | TH1 −15° to 90°, TH2 −40° to 40°, TH3 −12° to 12°, TH4 0–70°, TH5 −60° to 60° |
| Size | Shape and size of a typical adult male hand; equal-length fingers with staggered knuckles |
| Weight | 4.3 kg (hand and forearm) |
| Power-grasp payload | Up to 4 kg |
| Joint control accuracy | ±1° on every joint except the coupled distal finger joints |
| Speed | Full-range joint movement in free space at about 1 Hz (typical settings) |
| Actuation | 20 Shadow Smart Motor units with Maxon motors in the hand base, tendon-driven |
| Control loops | Torque loop at 5 kHz inside each motor unit; all other loops at 1 kHz on the host |
| Joint position sensing | Hall-effect sensor on every joint, about 0.2° resolution, 12-bit |
| Tendon force sensing | 40 tendon load sensors, about 30 mN resolution |
| IMU | 1 |
| Tactile sensing | Shadow Tactile Fingertips on the thumb and index finger as standard, up to 5; 17 three-axis Hall-effect taxels each |
| Sensor update rates | Position 1,000 Hz, tactile 1,000 Hz, force 500 Hz; temperature, current and voltage 100 Hz |
| Communication | EtherCAT, 100 Mbps |
| Software | ROS (control, visualisation, Gazebo simulation); Python and C++ access |
| Control PC | Multi-core laptop running Ubuntu with the drivers installed, supplied with the hand |
| Power | 48 V, 2.5 A supply, supplied with the hand |
| Materials | Aluminium, brass, acetal, polycarbonate, polyurethane flesh |
| Hand side | Right as standard; a mirrored left hand can be ordered |
| Options | Tactile fingertips on all five fingers; integration with a Universal Robots UR10e arm (6 more DoF, controlled with the hand over ROS) |
| What's in the box | Hand with forearm, control PC, power supplies, tactile fingertips, software and documentation |
| Robot mounting | Confirm at quote |
Industries
Frequently Asked Questions
It is offered by quotation. The price depends on the configuration — right or left hand, tactile fingertips on more fingers, a pair for a bimanual system or the UR10e arm option — and on delivery to your country, and we confirm it per project.
It has 24 joints: 20 driven by their own motors and 4 coupled fingertip movements. The thumb has 5 degrees of freedom, each finger 3, the little finger an extra palm joint and the wrist 2.
Shadow Tactile Fingertips are fitted to the thumb and index finger as standard, each with 17 taxels that sense in three axes, and the other fingers can take them as an option. Joint position, tendon force and IMU data stream alongside at up to 1,000 Hz.
The hand and forearm weigh 4.3 kg, and the hand holds up to 4 kg in a power grasp.
Over a 100 Mbps EtherCAT bus to the Ubuntu control PC supplied with it, with ROS drivers and Python and C++ access. Shadow offers the hand integrated with a Universal Robots UR10e arm; mounting to other arms is confirmed with the quotation.
The DH is the only one with five fingers, a wrist and 24 joints, on a 48 V supply. The Lite keeps three fingers and the thumb for 13 degrees of freedom at 2.4 kg, the Extra Lite two fingers and the thumb, and the Extra Super Lite one finger and the thumb.
Recently Viewed
You haven't viewed any products yet.
