- Contact sensing in fingers and palm Eight capacitive sensors, five at the fingertips and three in the palm, read contact up to 30 N at 5 % full-scale accuracy.
- Tangential force and direction Each reading includes tangential force and its direction from 0 to 359° alongside normal force, in 0.01 N steps.
- Proximity in every fingertip The five fingertip sensors add a proximity reading as a finger approaches a surface.
- RH56F1 mechanics Six degrees of freedom move 12 joints, with at least 15 N per fingertip, ±0.2 mm repeatability and a 30 kg passive payload rating.
- 620 g metal skeleton An all-metal integrated frame with concealed wiring, 183.3 mm long and 79.1 mm across the palm.
- Three control modes per finger Speed-force protection, force closed-loop and impedance control run over EtherCAT or RS-485 with 1 kHz real-time communication.
Description
The Inspire RH56F1-E2L-T1 is the left hand in Inspire Robots' tactile RH56F1 dexterous robotic hand line. It combines the RH56F1's metal-framed, six-actuator design with eight capacitive tactile sensors, so the left hand of a humanoid or a research rig can tell where an object touches it, how hard it presses and in which direction it pulls.
That contact data is what grasp-learning work, teleoperation with touch feedback and the handling of fragile or deformable objects need, and force sensing in the actuators alone cannot give it. The five fingertip sensors return normal force, tangential force, force direction from 0 to 359° and proximity; three palm sensors, in left, middle and right zones, return normal and tangential force with direction. All eight cover a 30 N range at 5 % full-scale accuracy, read out in 0.01 N steps.
Underneath is the full RH56F1: 12 joints moved by 6 degrees of freedom, a force sensor on each of the six actuators at 0.1 N resolution, at least 15 N at each fingertip and 10 N at the thumb, ±0.2 mm repeatability and a 30 kg passive payload as Inspire rates it. It weighs 620 g, is 183.3 mm long and 79.1 mm across the palm, and closes fully in 0.8 s or less while the thumb rotates through 60–180°.
The E2 interface puts EtherCAT and RS-485 side by side with 1 kHz real-time communication, on a 24–48 V supply that peaks at 5 A at 24 V. Tactile readings sit in their own registers next to joint position, force, current and actuator temperature, and each finger can run speed-force protection, force closed-loop or impedance control. Mounting to your arm or humanoid is confirmed with the quotation.
For a two-handed robot, the RH56F1 tactile right hand (E2R-T1) mirrors this one. The RH56F1 left hand without tactile sensors (E2L) shares the mechanics and is the choice when finger force feedback is enough. Browse all of our dexterous robotic hands.
Key Capabilities
- Contact sensing in fingers and palm: Eight capacitive sensors, five at the fingertips and three in the palm, read contact up to 30 N at 5 % full-scale accuracy.
- Tangential force and direction: Each reading includes tangential force and its direction from 0 to 359° alongside normal force, in 0.01 N steps.
- Proximity in every fingertip: The five fingertip sensors add a proximity reading as a finger approaches a surface.
- RH56F1 mechanics: Six degrees of freedom move 12 joints, with at least 15 N per fingertip, ±0.2 mm repeatability and a 30 kg passive payload rating.
- 620 g metal skeleton: An all-metal integrated frame with concealed wiring, 183.3 mm long and 79.1 mm across the palm.
- Three control modes per finger: Speed-force protection, force closed-loop and impedance control run over EtherCAT or RS-485 with 1 kHz real-time communication.
Buying through Robotix Market
This unit is sourced new through established distribution channels and ships worldwide with the manufacturer warranty. Technical support is coordinated with the manufacturer's own service network. Deployment scope, configuration, and commissioning responsibilities are agreed as part of the quotation — on-site installation is not included in the product price.
Official Product Videos
Features
Specs
| Brand | Inspire Robots |
|---|---|
| Model | RH56F1-E2L-T1 |
| Hand side | Left |
| Version | E2 (EtherCAT + RS-485) with T1 tactile sensors |
| Fingers | 5 |
| Degrees of freedom | 6 |
| Joints | 12 |
| Actuators | 6 micro linear servo actuators, each with a force sensor |
| Structure | All-metal integrated skeleton, concealed wiring |
| Weight | 620 ± 10 g |
| Length | 183.3 mm |
| Palm width | 79.1 mm |
| Tactile sensors | 8 capacitive: one in each fingertip, three in the palm (left, middle and right zones) |
| Tactile measurements | Normal force, tangential force and tangential force direction (0–359°); proximity at each fingertip |
| Tactile range | 30 N |
| Tactile accuracy | 5 % of full scale |
| Tactile data resolution | 0.01 N |
| Fingertip strength | ≥ 15 N |
| Thumb fingertip strength | ≥ 10 N |
| Force resolution (actuator sensors) | 0.1 N |
| Passive payload | 30 kg |
| Repeatability | ±0.2 mm |
| Thumb lateral rotation range | 60–180° |
| Thumb lateral rotation speed | > 155°/s |
| Thumb flexion speed | > 37°/s |
| Four-finger flexion speed | > 107°/s |
| Hand closing time | ≤ 0.8 s |
| Finger control modes | Speed-force protection, force closed-loop, impedance control |
| Control interface | EtherCAT + RS-485 |
| Protocols | Open register protocol and Modbus RTU over RS-485; EtherCAT PDO and SDO |
| Communication | 1 kHz real-time |
| Operating voltage | 24–48 V |
| Quiescent current at 24 V | 194 ± 10 mA (RS-485), 210 ± 10 mA (EtherCAT) |
| Peak current | 5 A at 24 V |
| Wrist connector | 8-pin aviation plug, compatible with LEMO FGG-1B-8P |
| Wrist mounting | 4 × Ø3.5 mm through holes |
| SDK and ROS support | Confirm at quote |
| Robot mounting | Confirm at quote |
Industries
Frequently Asked Questions
The Inspire RH56F1 Tactile Dexterous Hand Left (E2L-T1) is priced at CHF 5,475 in your market.
Yes, this is the left hand (E2L-T1). The RH56F1-E2R-T1 is the right hand with the same tactile sensors, and together they make a pair for a two-armed robot.
There are eight: one in each fingertip and three in the palm. They measure normal force, tangential force and its direction up to 30 N with 5 % full-scale accuracy, and the fingertip sensors also report proximity.
The E2L has the same mechanics, interfaces and 620 g weight but no tactile sensors; it grips by the six actuator force sensors at 0.1 N resolution. The E2L-T1 adds the eight tactile sensors.
Each fingertip pushes with at least 15 N and the thumb with at least 10 N, Inspire rates the passive payload at 30 kg, and the hand weighs 620 g.
EtherCAT and RS-485, with Inspire's open register protocol or Modbus RTU on RS-485 and 1 kHz real-time communication, on 24–48 V. SDK and ROS packages and fitment to your robot are confirmed with the quotation.
Inspire RH56F1 Tactile Dexterous Hand Left (E2L-T1)
- Regular price
- CHF 5,475.00
- Sale price
Recently Viewed
You haven't viewed any products yet.
