- 15 N thumb, 10 N fingertips The thumb tip pushes with 15 N and each of the four fingertips with 10 N.
- 540 g with 12 joints Six micro linear servo actuators drive 12 joints in a hand 217.8 mm long and 80.7 mm across the palm.
- Force feedback on every actuator Absolute position sensors and force sensors at 0.5 N resolution let each finger stop at a set force.
- Power-off self-lock The fingers hold their position when power is cut and need no repositioning at power-on.
- Quick fingers and thumb The four fingers flex at 260°/s and the thumb rotates through more than 65° at 107°/s, with fingertips repeating to ±0.20 mm.
- Open RS-485 control An open register protocol, up to 254 hands per bus and a 12–48 V DC supply keep integration simple.
Description
The Inspire RH56DFX is a five-finger dexterous robotic hand from Inspire Robots' RH56 series, made as a left hand (RH56DFX-2L) or a right hand (RH56DFX-2R). Inspire presents it as the balance of strength and speed in the range: 15 N at the thumb tip, 10 N at each fingertip and four-finger flexion at 260°/s, in a hand that weighs 540 g.
Six micro linear servo actuators move 12 joints, with absolute position sensors and a force sensor on each actuator for real-time force feedback at 0.5 N resolution. Give each finger a force threshold and it stops when it gets there, so firm and soft objects, a mug, an apple, a drill handle, are gripped by force rather than by position alone. A power-off self-lock holds the fingers in place, and the hand needs no repositioning when power comes back.
The hand is 217.8 mm long, 80.7 mm across the palm and 31.2 mm thick, and mounts on a Ø52 mm wrist flange with four 3.5 mm and four 6.0 mm holes. Fingertips repeat to ±0.20 mm; the thumb rotates laterally through more than 65° at 107°/s and flexes at 70°/s. Control runs over RS-485 at 115,200 bit/s by default (8 data bits, no parity, 1 stop bit) with an open register protocol, up to 254 hands on one bus and stored action sequences of up to eight gestures. The supply range is 12–48 V DC, with a 2 A peak at 24 V.
The Inspire RH56BFX shares this frame and weight but trades force for speed, with 570°/s finger flexion and 6 N at the thumb tip. The Inspire RH56E2 is the heavy-load hand at 30 N per thumb tip, and the RH56DFQ configured for the Unitree H2 is offered for that humanoid. See all of our dexterous robotic hands.
Key Capabilities
- 15 N thumb, 10 N fingertips: The thumb tip pushes with 15 N and each of the four fingertips with 10 N.
- 540 g with 12 joints: Six micro linear servo actuators drive 12 joints in a hand 217.8 mm long and 80.7 mm across the palm.
- Force feedback on every actuator: Absolute position sensors and force sensors at 0.5 N resolution let each finger stop at a set force.
- Power-off self-lock: The fingers hold their position when power is cut and need no repositioning at power-on.
- Quick fingers and thumb: The four fingers flex at 260°/s and the thumb rotates through more than 65° at 107°/s, with fingertips repeating to ±0.20 mm.
- Open RS-485 control: An open register protocol, up to 254 hands per bus and a 12–48 V DC supply keep integration simple.
This model is offered on a quotation basis. Configuration, accessories, integration scope and delivery schedule all change the final figure, so pricing is confirmed per project rather than listed.
Buying through Robotix Market
This unit is sourced new through established distribution channels and ships worldwide with the manufacturer warranty. Technical support is coordinated with the manufacturer's own service network. Deployment scope, configuration, and commissioning responsibilities are agreed as part of the quotation — on-site installation is not included in the product price.
Features
Specs
| Brand | Inspire Robots |
|---|---|
| Model | RH56DFX |
| Hand side | Left (RH56DFX-2L) or right (RH56DFX-2R), confirmed with the quotation |
| Fingers | 5 |
| Degrees of freedom | 6 |
| Joints | 12 |
| Actuators | 6 micro linear servo actuators with absolute position and force sensors |
| Weight | 540 g |
| Size | 217.8 mm long, 80.7 mm palm width, 31.2 mm thick |
| Thumb fingertip strength | 15 N |
| Fingertip strength | 10 N |
| Force resolution | 0.5 N |
| Repeatability | ±0.20 mm |
| Thumb lateral rotation range | > 65° |
| Thumb lateral rotation speed | 107°/s |
| Thumb flexion speed | 70°/s |
| Four-finger flexion speed | 260°/s |
| Power-off self-lock | Yes |
| Tactile sensors | None |
| Control interface | RS-485, open register protocol |
| RS-485 settings | 115,200 bit/s default, 8 data bits, no parity, 1 stop bit |
| Hands per RS-485 bus | Up to 254 |
| Action sequences | Stored sequences of up to 8 gestures |
| Operating voltage | 12–48 V DC |
| Quiescent current | 0.09 A at 24 V |
| Peak current | 2 A at 24 V |
| Wrist flange | Ø52 mm, 4 × Ø3.5 mm and 4 × Ø6.0 mm holes |
| SDK and ROS support | Confirm at quote |
| Robot mounting | Confirm at quote |
Industries
Frequently Asked Questions
The Inspire RH56DFX Dexterous Hand is offered by quotation: hand side, quantity and delivery are confirmed per project.
The thumb tip pushes with 15 N and each fingertip with 10 N. The hand weighs 540 g.
Six, moving 12 joints. Each of the four fingers has one actuator and the thumb two, for bending and for lateral rotation through more than 65°.
They share the 540 g frame, the 12 joints and the RS-485 interface. The DFX grips harder, with 15 N at the thumb tip and 10 N per fingertip; the BFX moves faster, with 570°/s finger flexion against the DFX's 260°/s.
Over RS-485 at 115,200 bit/s by default with an open register protocol, and up to 254 hands can share one bus. It runs on 12–48 V DC and mounts on a Ø52 mm wrist flange; fitment to your arm or humanoid is confirmed with the quotation.
No. It senses grip through a force sensor on each of its six actuators, at 0.5 N resolution. For fingertip and palm tactile sensing, look at the RH56E2 tactile builds or the RH56F1-E2L-T1.
Recently Viewed
You haven't viewed any products yet.
