- Tactile fingertips from 0.15 N Fingertip sensors register contact at 0.15 N and measure up to 20 N at 0.1 N resolution.
- 5 ms tactile response Touch data arrives within 5 ms, and readings between contact points stay within ±10 % of each other.
- Same 11-DoF hand as the L1 Six active and five passive joints at 1:1 human-hand proportion, in a hand of about 610 g.
- 25 kg lifting load It holds over 10 kg in a vertical grip and over 25 kg in a flat grip or lift, with 14 N pinch and 25 N lateral pinch.
- ±0.1 mm and 1,000,000 cycles Fingertips repeat to ±0.1 mm, and Casbot rates the hand for over a million fault-free continuous cycles.
- RS-485, CAN FD, EtherCAT The hand runs on 24–60 V, supports Windows, Linux, macOS and ROS 2, and is configured from a web page.
Description
The Casbot Handle L1 Pro is the tactile version of Casbot's Handle L1 dexterous robotic hand: the same 11-degree-of-freedom, human-scale five-finger hand, with tactile sensors in the fingertips. They register a touch from 0.15 N, measure up to 20 N at 0.1 N resolution and respond within 5 ms, so a controller knows the moment a finger meets an object.
That contact data matters most where a grip has to be judged, not just commanded: eggs, tofu, potato chips, tissues and other fragile or soft objects, parts that may slip, and research into tactile grasping. Casbot specifies a consistency between contact points within ±10 %. Combined with the hand's adaptive force control and its position and force-position closed loops, the Pro suits labs and integrators building grasping that relies on touch.
Everything else matches the standard hand. Six active and five passive joints give 11 degrees of freedom; the hand weighs about 610 g and measures 194 × 84 × 52 mm. Fingertips push with more than 10 N, pinch and lateral pinch reach 14 N and 25 N, and it holds over 10 kg in a vertical grip and over 25 kg in a flat grip or lift, across grip diameters of 16–95 mm. Repeatability is ±0.1 mm, and Casbot rates it for more than 1,000,000 fault-free cycles. It connects over RS-485, CAN FD or EtherCAT on 24–60 V, supports Windows, Linux, macOS and ROS 2, and is configured from a web page.
If your application does not need touch, the standard Casbot Handle L1 is the same hand without the fingertip sensors. Compare both with the rest of our dexterous robotic hands.
Key Capabilities
- Tactile fingertips from 0.15 N: Fingertip sensors register contact at 0.15 N and measure up to 20 N at 0.1 N resolution.
- 5 ms tactile response: Touch data arrives within 5 ms, and readings between contact points stay within ±10 % of each other.
- Same 11-DoF hand as the L1: Six active and five passive joints at 1:1 human-hand proportion, in a hand of about 610 g.
- 25 kg lifting load: It holds over 10 kg in a vertical grip and over 25 kg in a flat grip or lift, with 14 N pinch and 25 N lateral pinch.
- ±0.1 mm and 1,000,000 cycles: Fingertips repeat to ±0.1 mm, and Casbot rates the hand for over a million fault-free continuous cycles.
- RS-485, CAN FD, EtherCAT: The hand runs on 24–60 V, supports Windows, Linux, macOS and ROS 2, and is configured from a web page.
Buying through Robotix Market
This unit is sourced new through established distribution channels and ships worldwide with the manufacturer warranty. Technical support is coordinated with the manufacturer's own service network. Deployment scope, configuration, and commissioning responsibilities are agreed as part of the quotation — on-site installation is not included in the product price.
Features
Specs
| Brand | Casbot |
|---|---|
| Model | Handle L1 Pro (tactile version) |
| Fingers | 5, at 1:1 human-hand proportion |
| Degrees of freedom | 11 (6 active, 5 passive) |
| Weight | About 610 g |
| Size | 194 × 84 × 52 mm |
| Four-finger fingertip force | > 10 N |
| Pinch / lateral pinch force | 14 N / 25 N |
| Static vertical grip load | > 10 kg |
| Static flat-grip and lifting load | > 25 kg |
| Grip diameter | 16–95 mm |
| Fingertip repeat positioning accuracy | ±0.1 mm |
| Repeated opening and closing | < 0.6 s |
| Control | Position closed loop and force-position closed loop; adaptive force control |
| Service life | Over 1,000,000 fault-free continuous cycles |
| Durability | Resists accidental impacts and drops |
| Fingertip tactile force range | 0.15–20 N |
| Tactile resolution | 0.1 N |
| Tactile trigger force | 0.15 N |
| Consistency between contact points | Within ±10 % |
| Tactile response time | ≤ 5 ms |
| Communication interfaces | RS-485, CAN FD, EtherCAT |
| Software compatibility | Windows, Linux, macOS, ROS 2 |
| Configuration | Web-page setup without host software; built-in preset commands; open interface protocol |
| Operating voltage | 24–60 V |
| Current | 80 mA static, 350 mA with no load |
| Hand side | Confirm at quote |
| Robot mounting | Confirm at quote |
Industries
Frequently Asked Questions
The Casbot Handle L1 Pro Tactile Dexterous Hand is priced at CHF 4,030 in your market.
Tactile sensors in the fingertips with a 0.15–20 N range, 0.1 N resolution, a 0.15 N trigger force and a response time of 5 ms or less.
Only by the fingertip tactile sensors. Size, weight, 11 degrees of freedom, forces, interfaces and supply voltage are the same on both.
Eleven, six active and five passive, across five fingers at 1:1 human-hand proportion.
More than 10 kg in a vertical grip and more than 25 kg in a flat grip or lift; each fingertip pushes with over 10 N, and pinch and lateral pinch reach 14 N and 25 N.
Over RS-485, CAN FD or EtherCAT on 24–60 V, with Windows, Linux, macOS and ROS 2 support and web-page configuration. Mounting to your arm or humanoid is confirmed with the quotation.
Recently Viewed
You haven't viewed any products yet.
